​​MAXSECURE™ CLAY STABILIZER PRODUCTS

CLAY SECURE™ A100
Introducing ClaySecure™ A100, a 100% inorganic, environmentally friendly clay stabilizer with an extremely high efficiency and efficacy rate. In fact, in a series of studies ClaySecure’s innovative compound consistently outperformed the most common inorganic and organic clay stabilizers currently used in the field. The results are in. ClaySecure enhances field operations - increasing output and revenue - all while boasting a superior environmental profile.
Our Clay Secure™ line replaces traditionally used clay stabilizers such as choline chloride, KCL and TMAC.
  • PRODUCTS
  • BENEFITS
<
>
CLAY SECURE A100
CLAY SECURE A101
CLAY SECURE A102
CLAY SECURE A103
CLAY SECURE A104
  • 100% inorganic, environmentally friendly compound
  • Low toxicity replacement for organic clay stabilizers
  • Extremely high efficiency and efficacy
  • Unique polymers with a high charge density resulting in a low effective dosage
  • Resists wash-off even after multiple acid treatments
  • Extremely versatile and can be prepared in fresh water, HCl, and brine
  • Thermally stable above 350º F
  • Odor-free
  • Poses minimal health risks to humans
  • Very low vertebrate toxicity
  • Approved for use in North Sea
North Sea Approval
Clay Secure™ A100 clay stabilizer, developed and manufactured by MaxFlo Oilfield Chemical Solutions, has been granted approval for use in the North Sea according to The Offshore Chemical Notification Scheme (OCNS).

This highly effective, environmentally safe permanent clay stabilizer may now be utilized in North Sea drilling applications in The UK, The Netherlands, Norway, and Denmark.  Clay Secure™ A100 is supplied as an aqueous solution making its ease of use ideal for offshore work as well as on land applications.
MAXSECURE™ IN USE
  • ACIDIZING TREATMENTS
  • LOW CONCENTRATION
  • HIGH TEMPS/HIGH pH CONDITIONS
<
>
ClaySecure A100 is ideal for use during acidizing treatments.  A Berea sandstone core treated with 2.0 wt% ClaySecure A100 in 15% HCl was protected from fines migration and swelling after four acid treatments without re-application of clay stabilizer.  Pressure drop of 2.0 wt% ClaySecure run at 77ºF as a function of the cumulative injected volume at flow rate = 5 cm3/min.
ClaySecure A100 works in concentration as low as 0.2%. A Berea sandstone core treated with 1.0 wt% ClaySecure A100 was protected from fines migration and swelling after an extended fresh water soak and acid treatment without re-application of clay stabilizer. Pressure drop of 1.0 wt% ClaySecure at 200ºF as a function of the cumulative injected volume at a flow rate = 5 cm3/min.
ClaySecure A100 works at high temperature and in high pH conditions as well. A Berea sandstone core treated with 2.0 wt% ClaySecure A100 was protected from fines migration and swelling after an extended NaOH soak without re-application of clay stabilizer. Pressure drop of 2.0 wt% ClaySecure at 300ºF as a function of the cumulative injected volume at a flow rate = 5 cm3/min at high pH medium.